newDIALin9200 for Symbian

terminal emulator for nokia 9210/9290
Check now! Buy now!

Version: 3.05

NewDIALin9200 is a terminal emulator for the Nokia Communicator 9210/9290. The terminal engine, and user interface are based on the successful newTELnet9200 product.nThe dial-in connection is made via the GSM mobile telephone built into the Communicator.

newDIALin9200 by: NewNet marketing, last updated: 15/11/2004


About newDIALin9200

NewDIALin9200 is a terminal emulator for the Nokia Communicator 9210/9290. The terminal engine, and user interface are based on the successful newTELnet9200 product.The dial-in connection is made via the GSM mobile telephone built into the Communicator. The serial line can however also be used for internet or direct connections to a host at speeds up to 115Kbps.
Terminal connections can be easily made via the GSM network to remote hosts, or network switches using newDIALin9200.
When logged into remote systems, entry of complicated commands can be drastically simplified by using the "stored command" feature, or by using the command recall button.NewDIALin9200 can either be used to proactively connect to a remote modem ("connect mode"), or passively wait and accept an incoming data call ("answer mode")
All information can be simply entered when starting a call through a single dialog. In this dialog data can be easily extracted from a Contact database, or manually entered. The calltype (Analog, V.110, HSCSD, etc) and serial paramaters (7, or 8 bit, etc) will also be selected at this time. All this data will be stored in a history database, which can store up to 30 complete call entries. To simplify selecting data from this history, the calls can be given names under which they can be easily found.One of the most important design considerations was ease of use, for this reason the Communicator buttons can be configured by the user to allow easy entry of standard texts, or even program functions. Any one of 2 sets of buttons can be selected for these functions. A standard text, or escape sequence is entered in a very simple form, even control characters can be included. The user can therefore configure the complete screen for his optimal data entry environment to reduce the amount of data he has to entere from the keyboard.To further increase flexibility, the Communicator Number keys (+ Ctrl) can be used as "hot keys". Normally these are programmed to send the "function codes" F1 to F10. The codes can however be changed to send any text, or control sequence. NewDIALin9200 is a terminal emulator with extras. Normally when data disappears from the terminal screen it is lost for ever, newDIALin9200 however also includes a history buffer allowing the user to look back at the last received text from the remote host. He can even select and copy parts of this history into the clipboard for use with other text programs.The communicator screen is smaller than its terminal counterpart. This typically results in the user having to scroll backwards and forwards to see the complete screen. Normal scrollbars can be used for this. Just drag the contents of the screen by pressing the Func key, and the direction block. The scrollbars can even be completely removed from the screen leaving a larger terminal area than before.Another feature which can ease data entry is the "follow" cursor function. When this is selected the program will automatically scroll to follow the cursor. Depending on the program running on the host, this can be an advantage or not. For this reason, this function is normally placed on one of the buttons for easy access.NewDIALin9200 supports all standard ANSI, VT2xx, VT100, VT52, TVI950, WSYE 60 and ADM3A escape sequences. The following codepages can be selected:ISO88591, IBM1252, UTF7, UTF8, GB12345 and GB2312.All data can be traced into a logfile to help diagnose any communication problems. The cursor keys (up, down, etc) are predefined for the selected standard, however it has often been found that the different remote systems do not all stick by the standards. For this reason, the cursor escape sequences can be modified for each mode, this allows a complete flexibility.When configuring network switches or routers it is sometimes useful to be able to capture, and replay the data from the remote side. This can be done either by enabling the tracing functions. This allows a very large amount of data to stored. The data can then either be replayed, or copied via PC-Suite to the PC at a later date. The other possibility is to cut and paste the screen into another application. This is a cut from a terminal screen, and cannot therefore move move more data than is being displayed. Data pasted into newDIALIN9200 will be sent directly to the remote partner via the GSM link, and has no size limitation. This feature is often used to configure switches, or routers with configuration data stored as files.NewDIALin9200 is a shareware program. It is fully functional, but will remind the user at regular intervals that he should register. After 30 Days it will expire, and not allow any more connections to be made. The registration can be made simply online, and after the registration you will receive the registration code via email. This code must be entered into newDIALin9200, after which time all reminder windows will disappear.Languages: English, German
For more info...
Contact E-m@il

newDIALin9200, compatible Devices

Nokia 9210 Communicator, Nokia 9290 Communicator

Symbian FREEWARE mailing list

Want the latest Symbian Freeware sent directly to you? Enter your email address and receive the latest Symbian freeware updates in your inbox. You'll need to confirm your email address, so check your inbox.

You can also follow us on:

Follow Symbian Freeware on Twitter! Follow Symbian Freeware on Facebook! Follow Symbian Freeware on Technorati! Subscribe to Symbian Freeware via RSS!   Symbian freeware
Top S60 software